Cylinder head and camshafts
The Supply China Welded Mesh Reinforcement Suppliers - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The Wholesale China Welded Mesh Reinforcement OEM/ODM Quotes - Best Hardware Wholesale China Welded Mesh Reinforcement Wholesaler - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Wholesale China Welded Mesh Reinforcement Exporter - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
Wholesale China Welded Mesh Reinforcement Factory - Best Hardware with three bonds.
Dual AVCS
The Wholesale China Welded Mesh Reinforcement Manufacturers - Best Hardware's 'OEM China 6mm Welded Mesh Manufacturers - Best Hardware'
(Dual AVCS)Wholesale China Welded Mesh Reinforcement Suppliers - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- OEM China Welded Mesh 50x50 OEM/ODM Quotes - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
OEM China Welded Mesh 50x50 Wholesaler - Best Hardware(OEM China Welded Mesh 50x50 Exporter - Best Hardware).
OEM China Welded Mesh 50x50 Manufacturers - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,OEM China Welded Mesh 50x50 Suppliers - Best Hardware rotation (Supply China Welded Mesh 50x50 OEM/ODM Quotes - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
Supply China Welded Mesh 50x50 Wholesaler - Best Hardware for better fuel efficiency.
By
Supply China Welded Mesh 50x50 Exporter - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Supply China Welded Mesh 50x50 Factory - Best Hardware.Supply China Welded Mesh 50x50 Manufacturers - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Wholesale China Welded Mesh 50x50 Wholesaler - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Wholesale China Welded Mesh 50x50 Exporter - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Wholesale China Welded Mesh 50x50 Factory - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Wholesale China Welded Mesh 50x50 Suppliers - Best Hardware OEM China 13mm Welded Mesh OEM/ODM Quotes - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
OEM China 13mm Welded Mesh Exporter - Best Hardware feedback.
The injection and firing order for the Supply China Mosquito Wire Screen Suppliers - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,OEM China 13mm Welded Mesh Suppliers - Best Hardware parallel-Supply China 13mm Welded Mesh Wholesaler - Best Hardware. The parallel-Supply China 13mm Welded Mesh Exporter - Best Hardware Supply China 13mm Welded Mesh Factory - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Supply China 13mm Welded Mesh Manufacturers - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Supply China 13mm Welded Mesh Suppliers - Best Hardware enabled safe operation on lower RON fuel. Furthermore,Wholesale China 13mm Welded Mesh OEM/ODM Quotes - Best Hardware Wholesale China 13mm Welded Mesh Wholesaler - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’Wholesale China 13mm Welded Mesh Exporter - Best Hardware, the Wholesale China Welded Mesh 50x50 Factory - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Wholesale China 13mm Welded Mesh Factory - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.