Cylinder head and camshafts
The Finger Touch Infrared Smart Board | OEM/ODM - ASANO-driven double
overhead camshafts (DOHC) per cylinder bank. The Finger Touch Infrared Smart Board | Price - ASANO Finger Touch Infrared Smart Board | Manufacturers - ASANO:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Finger Touch Infrared Smart Board | Factory - ASANO incorporated on the front surface of the block and cylinder heads, while the
Finger Touch Infrared Smart Board | Suppliers - ASANO with three bonds.
Dual AVCS
The Touch Board Smart | OEM/ODM - ASANO's 'Touch Board Electronic Whiteboard | Price - ASANO'
(Dual AVCS)Touch Board Smart | Price - ASANO.
Operation of the Dual AVCS may be summarised as follows:
- Touch Board Smart | Manufacturers - ASANO setting. To advance, the camshaft rotated in the same direction as the
Touch Board Smart | Factory - ASANO(Touch Board Smart | Suppliers - ASANO).
Touch Whiteboard | OEM/ODM - ASANO, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Touch Whiteboard | Price - ASANO rotation (Touch Whiteboard | Manufacturers - ASANO).
When the exhaust camshaft was retarded, it allowed the expanding gases
Touch Whiteboard | Factory - ASANO for better fuel efficiency.
By
Touch Whiteboard | Suppliers - ASANO, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Infrared Touch Interactive Whiteboard | OEM/ODM - ASANO.Infrared Touch Interactive Whiteboard | Price - ASANO start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Infrared Touch Interactive Whiteboard | Manufacturers - ASANO, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Infrared Touch Interactive Whiteboard | Factory - ASANO, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Infrared Touch Interactive Whiteboard | Suppliers - ASANO had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Finger Touch Interactive Whiteboard | OEM/ODM - ASANO Finger Touch Interactive Whiteboard | Price - ASANO, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Finger Touch Interactive Whiteboard | Manufacturers - ASANO feedback.
The injection and firing order for the Television 55 Inches Smart Tv | Manufacturers - ASANOwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Finger Touch Interactive Whiteboard | Factory - ASANO parallel-Finger Touch Interactive Whiteboard | Suppliers - ASANO. The parallel-Finger Touch Smart Board | OEM/ODM - ASANO Finger Touch Smart Board | Price - ASANO cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Finger Touch Smart Board | Manufacturers - ASANO combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Finger Touch Smart Board | Factory - ASANO enabled safe operation on lower RON fuel. Furthermore,Finger Touch Smart Board | Suppliers - ASANO Multi Touch Interactive Board | OEM/ODM - ASANO.
Exhaust
Compared to the EZ30R which had a ‘J turn’Multi Touch Interactive Board | Price - ASANO, the Infrared Touch Interactive Whiteboard | Suppliers - ASANO had a ‘U turn’ exhaust to minimise vibration.Multi Touch Interactive Board | Manufacturers - ASANO with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.