Cylinder head and camshafts
The China acessórios 4X4 guincho s elétricos-driven double
overhead camshafts (DOHC) per cylinder bank. The Novo Design 4X4 12000lb sobressalente Famosa marca 4X4 marcação corda sintética Guincho eléctrico:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Fabricante profissional Guincho s de 4X4 incorporated on the front surface of the block and cylinder heads, while the
Venda a quente Auto Guincho eléctrico with three bonds.
Dual AVCS
The Venda a quente corda sintética Guincho eléctrico's 'Recuperação automática sobressalente 2000lb com as engrenagens de aço para passeios jipe'
(Dual AVCS)Guincho s Elétricos OEM.
Operation of the Dual AVCS may be summarised as follows:
- Venda a quente corda sintéticos CE Guincho eléctrico setting. To advance, the camshaft rotated in the same direction as the
Boa qualidade de 450um guincho relé 4X4(Guincho s Elétricos de boa qualidade).
Venda por grosso de Guincho eléctrico automático, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,China Fabricante 4X4 Corda sintética Guincho Eléctrico 9500lb rotation (2014 Novo Modelo Corda sintética Guincho eléctrico).
When the exhaust camshaft was retarded, it allowed the expanding gases
Marcação com Rolete do Cabo-Guia Guincho eléctrico for better fuel efficiency.
By
China Fabricante 4X4 marcação guincho s, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Venda por grosso Offroad Guincho eléctrico.China Fabricante 4X4 4WD Guincho eléctrico start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Untiy4wd guincho s elétricos, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Unidade 4WD guincho s elétricos, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the 9500lbs Guincho eléctrico para equipamento de 4X4 had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the 4X4 12V Guincho eléctrico Serviço de OEM livre 4X4 guincho s elétricos, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Promoção de venda Guincho s 4X4 feedback.
The injection and firing order for the Carro elevador eléctrico de Guincho com 9500lb corda sintéticawas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Venda por grosso de guincho usado para venda parallel-Guincho eléctrico 8000lb. The parallel-Design populares marcação 12V Guincho eléctrico 2021 Hotselling 4X4 Acessório em trilhas marcação Guincho Eléctrico cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
2021 Fabricante bastante Stock Hotsale Auto Guincho eléctrico combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
2021 Canton Fair Nova 4X4 Aprovado pela CE guincho s elétricos enabled safe operation on lower RON fuel. Furthermore,Bom Mercado marcação Winch 4X4 2021 Unity4wd corda sintética da marca Hotsale Guincho eléctrico.
Exhaust
Compared to the EZ30R which had a ‘J turn’O Unity4wd corda sintética da marca ATV Guincho Eléctrico do, the 9500lbs Guincho eléctrico para equipamento de 4X4 had a ‘U turn’ exhaust to minimise vibration.Qualidade superior marcação Mini 12v Guincho Eléctrico with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.