Cylinder head and camshafts
The Vela à prova de sombra Triangle Parasol Poliéster velejar-driven double
overhead camshafts (DOHC) per cylinder bank. The De HDPE Pano de protecção solar Pátio de tecido GSM personalizados a Sun Shade Sail:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Vela impermeável ao ar livre a Sun Shade Sail Square incorporated on the front surface of the block and cylinder heads, while the
Compensação da agricultura with three bonds.
Dual AVCS
The Praça de tamanho personalizado alta qualidade tons tejadilho velejar's 'Rede de segurança para a construção sombra Net'
(Dual AVCS)Sol de alta qualidade Shade Sail Vela à prova água.
Operation of the Dual AVCS may be summarised as follows:
- Venda a quente para cima na pista molhada cabines de pintura setting. To advance, the camshaft rotated in the same direction as the
Tecido exterior à prova comercial Shade Sail(140mm cinzel PC200 rompedor hidráulico).
Doosan máquinas de construção rompedor hidráulico, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,1: 12 1 rotation (Bomba de concreto a extremidade acoplamento borracha Kits /junta).
When the exhaust camshaft was retarded, it allowed the expanding gases
Escavadeira martelo hidráulico e partes separadas for better fuel efficiency.
By
Coreano Classe Superior pequeno rompedor hidráulico para Escavadoras, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Material e o guindaste partes separadas de passageiros Micro engrenagem redutor fornecedores.Yantai Baicai Qualidade Alta SB40 Disjuntor de rocha para Escavadoras start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Engenharia de Alta Eficiência da barra quebra rocha fixo, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The 350kg de rocha hidráulicas Breaker retroescavadora, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Hidráulico de Alta Qualidade Fêmea Orfes as conexões da mangueira had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the CIR/BR/COP/SD/Missão/Ql/DHD/para baixo numa o orifício de perfuração rocha martelo DTH 1 pol. a 12 De HDPE pano de sombra, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
O gerador de pano sombra feedback.
The injection and firing order for the Guincho de UHMWPE HDPE CORDA DE REBOQUEwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Andaimes Net-80GSM parallel-Pano de sombreamento malha. The parallel-Pano de tonalidade vermelha/Shade Sail Sombra negra Net cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Fabricante direto da China de alta qualidade 100% virgem por grosso HDPE Sombra Net combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Sombra de cultura Net enabled safe operation on lower RON fuel. Furthermore,Rede de barreira laranja/amarelo Redes de sombra Raschel.
Exhaust
Compared to the EZ30R which had a ‘J turn’Sombra fornecedor de rede, the Hidráulico de Alta Qualidade Fêmea Orfes as conexões da mangueira had a ‘U turn’ exhaust to minimise vibration.Sombra Net - 36gsm para a Rússia e Ucrânia with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.