Cylinder head and camshafts
The 8971092460-driven double
overhead camshafts (DOHC) per cylinder bank. The Bvp Isuzu 4JG1 1876100760:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,Bvp 1-87611006-0 Filtro de Óleo para 6bg1 incorporated on the front surface of the block and cylinder heads, while the
Ex Ex300-5200-5 with three bonds.
Dual AVCS
The 4LE1 4le2 Válvula de saída do Assento's 'Os espaçadores do Tubo duto plástico de HDPE/Espaçadores Duto China Fabricante'
(Dual AVCS)4le2 do Tubo de retorno óleo turbocompressor 8-98030564-0 para Cx75 a máquina.
Operation of the Dual AVCS may be summarised as follows:
- SL-6001 Pressão Alta PU Injecton Bomba com manômetro Pressure-Adjustable setting. To advance, the camshaft rotated in the same direction as the
Pressure-Adjustable SL-6001 resina Epoxy Máquina da bomba de injeção a espuma(SL-6001 Projeto à Prova de resina epóxi Pressure-Adjustable PU máquina da Bomba Injeção).
Projecto impermeável SL-6001 Pressure-Adjustable da bomba de injeção poliuretano, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Válvula de admissão da válvula 8-97102123-0 4LE2 rotation (8980904301 898090-4301 8-98090430-1 4le2 da Polia do Ventilador).
When the exhaust camshaft was retarded, it allowed the expanding gases
4LE1 4le2 Válvula de admissão for better fuel efficiency.
By
4le2 Cx75 8-98049033-0 da Correia do Ventilador, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Ajustável de alta pressão injeção poliuretano Bomba com 110V Metabo furar.4le2 Cx75 refrigerador de EGR Asm 8-98030525-1 start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Ajustável em máquinas de construção e engenharia alta pressão da bomba argamassa poliuretano, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Egr válvula feita no Japão 8-98030597-1 4LE2, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Sk75-8 4le2 bico de injector gasóleo 8980928210 898092-8210 had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Vedação de Óleo do Virabrequim 8-97049145 Dianteiro-0 para 4JG1 4JG2 4LE1 4le2 4LB1 4LE1 4LE2 3LB1 3LD1 5-09625094 Traseiro da Vedação de Óleo do Virabrequim-0, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
4JJ1 Escavadoras Sh120 SH100 Sensor de Velocidade da Revolução 1815105130 6RB1 Sh450-3 feedback.
The injection and firing order for the Venda a quente de Emergência alta qualidade 12V Portable Mini- guincho com 3500lbwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Rastreado Chassis com 200kg de carga ostentando para personalização do Robô parallel-6-32mm 3Kw Vergalhão Barra de qualidade superior corte preço do Cortador. The parallel-8-98089084-0 4le1/4le2 Kit de metal apoios cambota ZX55 As peças do motor da escavadeira Peças da Bomba de Combustível terraplenagem para 4le2 ZX55 8-98030569-0 cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
4le2 8980638280 do virabrequim para miniescavadora ZX85usblc-3 combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Anel do Pistão original definido para 4le2 Cx75 ZX55 8-98095215-0 8-97141208-0 enabled safe operation on lower RON fuel. Furthermore,3KW 40mm Barra de aço corte da barra para o site Cnstruction Motor de partida original do Japão 24 V para 4le2 8-98072315 8-98072315-0-1.
Exhaust
Compared to the EZ30R which had a ‘J turn’Cortador de barra aço 50 mm para venda Vergalhão Preço do, the Sk75-8 4le2 bico de injector gasóleo 8980928210 898092-8210 had a ‘U turn’ exhaust to minimise vibration.rasto de borracha 350x52.5x104 para HDD Zt-18 perfuração direcional with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.