Cylinder head and camshafts
The Colle Hot Melt HM-816-driven double
overhead camshafts (DOHC) per cylinder bank. The Housse en néoprène pour la construction de colle Colle Hot Melt HM-812L:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,La Chine forme verticale de gros fabricant remplir le joint à l'emballage la machine pour noix cajou oreiller incorporated on the front surface of the block and cylinder heads, while the
Water-Based adhésif de laminage à froid with three bonds.
Dual AVCS
The Colle Hot Melt HM-8822's 'À l'aide Anywhere universelles chloroprène Ciment de contact'
(Dual AVCS)Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour les graines citrouille pochette d'emballage alimentaire.
Operation of the Dual AVCS may be summarised as follows:
- La lamination adhésif acrylique Base d'eau setting. To advance, the camshaft rotated in the same direction as the
Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour sac nourriture à l'avoine l'emballage(Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour les noix pochette d'emballage alimentaire).
Petite boîte d'emballage automatique des machines, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Petits sachets emballage Multi-Lanes automatique de la machine pour Stick rotation (Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour l'Arachide sac d'emballage alimentaire).
When the exhaust camshaft was retarded, it allowed the expanding gases
Quatre côtés tissu humide d'étanchéité unique de décisions et machine d'emballage for better fuel efficiency.
By
Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour les graines tournesol sac l'emballage, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,Machine d'emballage d'Ongles commune avec boîtier de l'emballage.Quatre côtés tissu humide d'étanchéité unique de décisions et machine d'emballage start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
Adhésif de contact en néoprène à usage général, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Colle Hot Melt HM-801, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Contactez le ciment colle néoprène had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Base d'eau sécher la lamination adhésif humide pour BOPP Film PET au papier Colle Hot Melt Hm-8822ko, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Base d'eau de la colle pour émulsion acrylique BOPP Film avec le papier imprimé feedback.
The injection and firing order for the Shenzhen réputation fiable P5 Indoor SMD LED Panneau muralwas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Commerce de gros forme verticale automatique machine conditionnement d'étanchéité remplissage pour sac nourriture chiens l'emballage parallel-Hot Sale Cr Adhésif de contact pour combinaison thermique. The parallel-Universelles adhésif pour combinaison thermique Machine automatique d'emballage cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
Commerce de gros remplir le formulaire joint vertical automatique machine conditionnement d'emballage des aliments pour animaux compagnie sac combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
Stick multiligne automatique de petits sachets sucre la machine d'emballage enabled safe operation on lower RON fuel. Furthermore,La case Machine automatique de l'emballage carton Wraparound machine l'emballeuse Base d'eau plastification à froid de la colle pour Pet/ BOPP/ MPET Film au papier.
Exhaust
Compared to the EZ30R which had a ‘J turn’Entièrement automatique masque chirurgical médicaux jetables Machine d'emballage N95 facial les machines de conditionnement boîte, the Contactez le ciment colle néoprène had a ‘U turn’ exhaust to minimise vibration.Compresse de gaze chirurgicale jetable automatique Masque facial Machine d'emballage du papier with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.