Block and crankcase
Like its EJ20 predecessor,Best China Defoamer Oil Drilling OEM/ODM Quotes - SIXINBest China Defoamer Oil Drilling Wholesaler - SIXIN aluminium alloy block with 92.0 mm bores – with cast iron dry-type cylinder
liners – and a 75.0 mm stroke for a capacity of 1994 cc. The cylinder block
for the Best China Defoamer Oil Drilling Exporter - SIXIN-deck design whereby the cylinder
walls were supported at the three and nine o’clock positions.
The
crankcase for the Best China Defoamer Oil Drilling Factory - SIXIN flywheel housing was cast with the crankcase for increased rigidity. For the
Good China Defoamer Cementing Factory - SIXIN, the crankshaft thrust bearing was relocated to the
Best China Defoamer Oil Drilling Suppliers - SIXIN frequencies to the transmission and driveline.
Cheap China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN
Cheap China Defoamer Oil Drilling Exporter - SIXINCheap China Defoamer Oil Drilling Factory - SIXIN from cast aluminium,Cheap China Defoamer Oil Drilling Manufacturers - SIXIN predecessor. To reduce friction,Cheap China Defoamer Oil Drilling Suppliers - SIXINGood China Defoamer Oil Drilling Exporter - SIXIN Hot Sale China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN. Other features of
Hot Sale China Defoamer Oil Drilling Wholesaler - SIXIN-Hot Sale China Defoamer Oil Drilling Factory - SIXIN, flat top combustion surfaces
Hot Sale China Defoamer Oil Drilling Suppliers - SIXIN.
High Quality China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN
High Quality China Defoamer Oil Drilling Wholesaler - SIXINHigh Quality China Defoamer Oil Drilling Exporter - SIXIN High Quality China Defoamer Oil Drilling Manufacturers - SIXIN.High Quality China Defoamer Oil Drilling Suppliers - SIXIN temperature, the air inlet duct received air from outside the under bonnet
area. Furthermore, two resonators were incorporated in the air duct to
‘smooth’ the air flow and a large still air box - mounted on the throttle
chamber -ODM China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN.
Cylinder head
The ODM China Defoamer Oil Drilling Suppliers - SIXIN cross-flow cooling.OEM China Defoamer Oil Drilling Wholesaler - SIXIN,OEM China Defoamer Oil Drilling Factory - SIXIN OEM China Defoamer Oil Drilling Manufacturers - SIXIN‘Good China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN’ motion for air as it entered the
cylinder for better mixing of the air and fuel for more uniform flame travel
and faster combustion.OEM China Defoamer Oil Drilling Suppliers - SIXIN,Supply China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN for maximum gas pressure (downward force)Supply China Defoamer Oil Drilling Wholesaler - SIXIN-15
degrees ATDC (after top dead centre) when the maximum turning moment on the
crankshaft occurred, thereby increasing power output.
Camshaft and valves
The Supply China Defoamer Oil Drilling Exporter - SIXIN-type single overhead camshaft
(SOHC) per cylinder bank. Due to the cylinder head offset, the left camshaft
was longer than the right camshaft to align the cam belt sprockets. Both
camshafts were driven by a single belt which had round profile teeth for
quiet operation and was constructed of wear-resistant double canvas and heat
resistant rubber materials with a wire core. Furthermore, the timing belt
had an automatic tensioner which allowed for thermal expansion and
contraction. The recommended replacement interval for the cam belt was
100,000 kilometres or four years, whichever occurred first.
The
Supply China Defoamer Oil Drilling Factory - SIXIN roller rocker arms. Valve clearance checking/adjustment was only necessary
every 150,000 kms.
Injection and ignition
The Supply China Defoamer Oil Drilling Manufacturers - SIXIN-point sequential fuel injection and
centrally located spark plugs. The Supply China Defoamer Oil Drilling Suppliers - SIXIN coils (one for each pair of cylinders, i.e. 1-2 and 3-4) which fired the
spark plugs directly twice per cycle.Wholesale China Defoamer Oil Drilling OEM/ODM Quotes - SIXIN ‘fuzzy logic’ that enabled the maximum ignition advanced angle to be used
without detonation since the programme continually adapted to changes in
environmental conditions and fuel quality.
The High Quality China Defoamer Fermentation Wholesaler - SIXIN
Wholesale China Defoamer Oil Drilling Wholesaler - SIXIN.1:1, compared to 9.7:1 for its
OEM China Heat Shrink Tape Manufacturers - Newerapredecessor.OEM China Defoamer Oil Drilling Suppliers - SIXIN, the better air/fuel mixing provided by the
Wholesale China Defoamer Oil Drilling Exporter - SIXINWholesale China Defoamer Oil Drilling Factory - SIXIN to detonation or pinging, enabling a higher compression ratio.
For
the Good China Defoamer Cementing Factory - SIXIN, the injection and firing order was 1-3-2-4.
Wholesale China Defoamer Oil Drilling Manufacturers - SIXIN/Wholesale China Defoamer Oil Drilling Suppliers - SIXIN: EJ202 changes
For the
OEM China Defoamer Refinery Wholesaler - SIXINwhich was introduced in 2003, a number of
Good China Defoamer Oilfield OEM/ODM Quotes - SIXIN:
- A lighter cylinder block and head;
- Thinner and lighter cylinder liners;
- A sintered crankshaft journal;
- A re-Good China Defoamer Oilfield Wholesaler - SIXIN; and,
- A new 4-2-Good China Defoamer Oilfield Exporter - SIXIN.
