Cylinder head and camshafts
The OEM China Galvanised Steel Wire Mesh Exporter - Best Hardware-driven double
overhead camshafts (DOHC) per cylinder bank. The OEM China Galvanised Steel Wire Mesh Factory - Best Hardware OEM China Galvanised Steel Wire Mesh Manufacturers - Best Hardware:
- A 10 mm chain which drove an idler from the crankshaft sprocket;
and,
- From the idler, two 8 mm chains which drove the left and right bank
camshafts.
For the EZ36D,OEM China Galvanised Steel Wire Mesh Suppliers - Best Hardware incorporated on the front surface of the block and cylinder heads, while the
Supply China Galvanised Steel Wire Mesh OEM/ODM Quotes - Best Hardware with three bonds.
Dual AVCS
The Supply China Galvanised Steel Wire Mesh Wholesaler - Best Hardware's 'Wholesale China Galvanised Wire Mesh Fencing Suppliers - Best Hardware'
(Dual AVCS)Supply China Galvanised Steel Wire Mesh Exporter - Best Hardware.
Operation of the Dual AVCS may be summarised as follows:
- Supply China Galvanised Steel Wire Mesh Factory - Best Hardware setting. To advance, the camshaft rotated in the same direction as the
Supply China Galvanised Steel Wire Mesh Suppliers - Best Hardware(Wholesale China Galvanised Steel Wire Mesh OEM/ODM Quotes - Best Hardware).
Wholesale China Galvanised Steel Wire Mesh Wholesaler - Best Hardware, it allowed more air and fuel to
enter the cylinder for greater power; and,
- The exhaust camshaft could retard up to 21 degrees from its basic
idle setting. To retard,Wholesale China Galvanised Steel Wire Mesh Exporter - Best Hardware rotation (Wholesale China Galvanised Steel Wire Mesh Factory - Best Hardware).
When the exhaust camshaft was retarded, it allowed the expanding gases
Wholesale China Galvanised Steel Wire Mesh Manufacturers - Best Hardware for better fuel efficiency.
By
Wholesale China Galvanised Steel Wire Mesh Suppliers - Best Hardware, Dual AVCS enabled better
scavenging of the cylinders, reduced pumping losses and increased exhaust
gas recirculation (EGR).
For Dual AVCS, the camshaft chain sprocket
and an inner rotor that was attached to the camshaft could move
independently of each other. When oil pressure was applied to one side of
the rotor,OEM China 6mm Galvanised Mesh Exporter - Best Hardware.OEM China 6mm Galvanised Mesh Manufacturers - Best Hardware start-up and fail-safe operation, each inner rotor had a lock pin that was
spring loaded to keep the inner rotor locked to the chain sprocket. When the
OEM China 6mm Galvanised Mesh Suppliers - Best Hardware, the lock pin was pushed into the rotor
with oil pressure from the oil control valve (OCV) and the lock pin was
released from the chain sprocket.
Injection and ignition
The Supply China 6mm Galvanised Mesh OEM/ODM Quotes - Best Hardware, multipoint fuel injection, though injector
flow rates were increased relative to the EZ30R. Similarly, the Supply China 6mm Galvanised Mesh Wholesaler - Best Hardware had an individual ignition coil for each cylinder (i.e. ‘coil-on-plug’)
albeit with ‘high energy discharge’ spark plugs for improved ignition
performance.
While the Supply China 6mm Galvanised Mesh Exporter - Best Hardware Supply China 6mm Galvanised Mesh Factory - Best Hardware, its compression ratio was
lowered to 10.5:1 (compared to 10.7:1 for the EZ30). Dual knock sensors
Supply China 6mm Galvanised Mesh Manufacturers - Best Hardware feedback.
The injection and firing order for the Supply China Welded Mesh Fencing Manufacturers - Best Hardwarewas
1-6-3-2-5-4.
Cooling
Compared to EZ30,Supply China 6mm Galvanised Mesh Suppliers - Best Hardware parallel-Wholesale China 6mm Galvanised Mesh Wholesaler - Best Hardware. The parallel-Wholesale China 6mm Galvanised Mesh Manufacturers - Best Hardware OEM China Galvanised Metal Mesh Wholesaler - Best Hardware cylinders individually – rather than flowing from cylinder to cylinder – and
to move through the cylinder heads simultaneously.
The parallel-flow
OEM China Galvanised Metal Mesh Manufacturers - Best Hardware combustion temperatures by 30-50 degrees Celsius for a 1 degree Celsius
OEM China Galvanised Metal Mesh Suppliers - Best Hardware enabled safe operation on lower RON fuel. Furthermore,Supply China Galvanised Metal Mesh Wholesaler - Best Hardware Wholesale China Galvanised Metal Mesh Wholesaler - Best Hardware.
Exhaust
Compared to the EZ30R which had a ‘J turn’Wholesale China Galvanised Metal Mesh Exporter - Best Hardware, the Supply China 6mm Galvanised Mesh Wholesaler - Best Hardware had a ‘U turn’ exhaust to minimise vibration.Wholesale China Galvanised Metal Mesh Factory - Best Hardware with exhaust gas recirculation (EGR) whereby an exhaust port located on the
rear of the left cylinder head supplied exhaust gas via a metal pipe to an
electronically-controlled EGR valve.